F8Technical Notes and IndexThe camera turns off withoutwarning.• The camera automatically turns off to savepower (auto off function).• The camera and battery may not work properlyat low temperatures.• The inside of the camera has become hot. Leavethe camera off until the inside of the camera hascooled, and then try turning it on again.• The camera turns off if the USB cableconnecting it to a computer or printer isdisconnected. Reconnect the USB cable.21F4–75, 80, E21Monitor is blank.• The camera is off.• The battery is exhausted.• The camera has entered standby mode to savepower. Press the power switch, shutter-releasebutton, A button, c button, or b (e movie-record) button.• The flash lamp flashes while the flash ischarging. Wait for the flash to charge.• The camera and computer are connected viathe USB cable.• The camera and TV are connected via an audiovideo cable.2020214575, 8075, E19Monitor is hard to read. • Adjust the monitor brightness.• The monitor is dirty. Clean the monitor.73, E62F6Date and time of recordingare not correct.• If the camera clock has not been set, the “Datenot set” indicator flashes during shooting andmovie recording. Images and movies recordedbefore the clock is set are dated “00/00/000000:00” and “01/01/2014 00:00” respectively. Setthe correct time and date for Time zone anddate in the setup menu.• The camera clock is not as accurate as ordinarywatches or clocks. Periodically compare the timeof the camera clock with that of a more accuratetimepieces, and reset as required.16, 73, E60Problem Cause/Solution A
