11Preparing for Shooting1 With the battery installed, connect the camera to anelectrical outlet.If a plug adapter* is included with your camera, securely connect it to theCharging AC Adapter. Once the two are connected, attempting to forciblyremove the plug adapter could damage the product.* The shape of the plug adapter varies according to the country or region inwhich the camera was purchased. This step can be omitted if the plugadapter comes permanently bonded to the Charging AC Adapter.• The power-on lamp slowly flashes orange to indicate that the battery ischarging.• When charging is complete, the power-on lamp turns off. It takes about 2hours to charge a fully exhausted battery.• The battery cannot be charged when the power-on lamp quickly flashesorange, possibly due to one of the reasons described below.- The ambient temperature is not suited to charging.- The USB cable or Charging AC Adapter is not properly connected.- The battery is damaged.2 Disconnect the Charging AC Adapter from the electricaloutlet and then disconnect the USB cable.Charge the BatteryUSB cable (included)Power-on lamp Electrical outletCharging AC Adapter
