(~) Vibration ReductionMENU button -+ V(Setup menu) (lII125) -+ <.all> Vibration reductionSelect the vibration reduction option for shooting. Vibration reduction effectivelyreduces blur, caused by slight hand movement known as camera shake, whichcommonly occurs when shooting with zoom applied or at slow shutter speeds.The effects of camera shake are reduced when recording movies, in addition towhen taking still pictures.Set Vibration reduction to Off when using a tripod to stabilize the cameraduring shooting.(I) On (default setting)Vibration reduction is enabled.The camera detects and factors out panning movements when reducing camerashake. When the camera is panned horizontally, for example, vibration reductionreduces only vertical shake. If the camera is panned vertically, vibration reductionaffects only horizontal shake.OffVibration reduction is not enabled.The current vibration reduction setting can be confirmed in the camera monitorwith shooting (CO 6, 23). When Off is selected, no icon is displayed.~ Notes on Vibration Reduction• Vibration reduction may take a few seconds to activate aher the power is turned on, or the cameraenters shooting mode from playback mode. Wait until the image of the monitor stabilizes beforeshooting.• Due to characteristics of the vibration reduction function, images displayed in the camera'smonitor immediately after shooting may be displayed blurry.• Vibration reduction may be unable to completely eliminate the effects of camera shake in somesituations. 133
