12Workfl ow BeforeRecording Live View Menu Options Other Settings Recording AfterRecordingWhite BalanceWhite BalanceAuto white balance is recommended with most light sources. If the desired results can not beachieved with auto white balance, choose another option as described below. Select an optionaccording to the light source, or choose a specific color temperature or measure a value for presetmanual white balance.Selecting a White Balance OptionSelecting a White Balance OptionIn movie live view, white balance canbe selected by keeping the U buttonpressed and rotating the main com-mand dial until the desired setting isdisplayed in the monitor or in the con-trol panel (D800/D800E) or rear controlpanel (D4).U buttonMain command dialControl panelChoosing a Color TemperatureChoosing a Color TemperatureFollow the steps below to set white balance to a selected color temperature.Set white balance to K (Choose color temp).Keeping the U button pressed,rotate the main command dial untilK is displayed in the control panel(D800/D800E) or rear control panel(D4).Control panelChoose a color temperature.Keeping the U button pressed,rotate the sub-command dial toselect the color temperature (Am-ber–Blue only; to choose a valuefor Green–Magenta, use the Whitebalance > Choose color temp. op-tion in the shooting menu).U buttonSub-command dialControl panelAlternatively, color temperaturecan be entered directly in incre-ments of 10 K by keeping the Ubutton pressed and using the multiselector. Press 4 or 2 to highlighta digit and press 1 or 3 to change.Multi selector12