14 Introduction: First StepsAdjusting Viewfinder FocusPhotographs are framed in the viewfinder. Before shooting, makesure that the display in the viewfinder is in clear focus. The view-finder can be focused by removing the lens cap and sliding thediopter adjustment control up and down until the focus bracketsare in sharp focus. When operating the diopter adjustment con-trol with your eye to the viewfinder, be careful not to put your fin-gers or fingernails in your eye.Auto Meter OffAt default settings, the viewfinder and shooting information display will turn off if no operations areperformed for about eight seconds (auto meter off ), reducing the drain on the battery. Press the shut-ter-release button halfway to reactivate the display in the viewfinder ( 17).The length of time before the exposure meters turn off automatically can be adjusted using CustomSetting 15 (Auto off timers; 78).8sExposure meters on Exposure meters off Exposure meters onFocus brackets
