211ConnectionsCopy Pictures to the ComputerBefore proceeding, be sure you have installed ViewNX 2 (0 210).1 Connect the USB cable.After turning the camera off and ensuring that a memorycard is inserted, connect the supplied USB cable as shownand then turn the camera on.Using ViewNX 2A Use a Reliable Power SourceTo ensure that data transfer is not interrupted, be sure the camerabattery is fully charged.A Connecting CablesBe sure the camera is off when connecting or disconnectinginterface cables. Do not use force or attempt to insert theconnectors at an angle.D During TransferDo not turn the camera off or disconnect the USB cable whiletransfer is in progress.D USB HubsTransfer may not proceed as expected if the camera is connectedvia a USB hub or keyboard.
