107Reference—Connecting to a ComputerThe supplied USB cable can be used to connect the camera to a computer.Once the camera is connected, the supplied software can be used to copy pho-tographs to the computer, where they can be browsed, viewed, and retouched.The camera can also be used with Nikon Capture 4 Version 4.4 or later (availableseparately), which supports batch processing and more advanced image editingoptions and can be used to control the camera directly from the computer.Before Connecting the CameraInstall the necessary software after reading the manuals and reviewing the sys-tem requirements. To ensure that data transfer is not interrupted, be sure thecamera battery is fully charged. If in doubt, charge the battery before use or usean EH-6 AC adapter (available separately).Before connecting the camera, set the USB option inthe setup menu ( 121) according to the computeroperating system and whether the camera is beingcontrolled from Nikon Capture 4 Version 4.4 or later(available separately) or photographs are being trans-ferred to the computer using the supplied software:Operating system Supplied software Nikon Capture 4 Camera ControlWindows XP Home EditionWindows XP Professional Choose PTP or MassStorageChoose PTPMac OS XWindows 2000 ProfessionalWindows Millennium Edition (Me)Windows 98 Second Edition (SE)Choose Mass Storage*Mac OS 9 Not supported* Do NOT select PTP. If PTP is selected when the camera is connected, the Windows hard-ware wizard will be displayed. Click Cancel to exit the wizard, and then disconnect thecamera. Be sure to select Mass Storage before reconnecting the camera.Connecting to a Computer
