Chapter 1 n Quick Setup Guide 3multi selector to scroll down to the Setup menu (it’s marked with a wrenchicon), press the multi selector button to the right, and then press the downbutton to scroll down to Time Zone and Date, and press the right buttonagain. The options for setting the 24-hour clock will appear on the screen thatappears next.Mounting the LensIf your D7200 has no lens attached, you’ll need to mount one beforeshooting:1. Select the lens and loosen (but do not remove) the rear lens cap.2. Remove the body cap on the camera by rotating the cap away from theshutter release button.3. Once the body cap has been removed, remove the rear lens cap from thelens, set it aside, and then mount the lens on the camera by matching thealignment indicator on the lens barrel with the white bump on the cam-era’s lens mount (see Figure 1.3). Rotate the lens toward the shutter releaseuntil it seats securely.4. Set the focus mode switch on the lens to AF or M/A (Autofocus). If thelens hood is bayoneted on the lens in the reversed position, twist it off andremount with the “petals” (if present) facing outward. A lens hood pro-tects the front of the lens from accidental bumps, and reduces flare causedby extraneous light arriving at the front of the lens from outside the pic-ture area.Figure 1.3 Match the indicator on the lens with the white dot on the camera mountto properly align the lens with the bayonet mount.