64More on PlaybackViewing Pictures on TVThe EG-CP14 audio/video (A/V) cable provided with your camera can be usedto connect the camera to a television or video-cassette recorder (VCR).Choosing Video ModeVideo mode in the Interface option of the camera Set-up menu offers a choice ofNTSC and PAL standards ( 132). Be sure that the standard selected matches thatused in the device.1 Turn the camera offTurn the camera off before connecting or dis-connecting the A/V cable.2 Connect the A/V cable to the cameraOpen the Interface connector Cover andinsert the black plug of the A/V cable into thecamera’s Audio/Video (A/V) out Connector.Check to be sure the connector is in thecorrect orientation and insert the plugstraight. Do not insert or disconnect itforcibly.3 Connect the A/V cable to the televi-sion or VCRInsert the yellow plug of the A/V cable intothe video-in jack on your television or VCRand the white plug into the audio-in jack.4 Tune the television to the video channelFor more information, see the manual foryour television or VCR.5 Turn the camera onPress the Button for at least two seconds toturn the camera on. The camera monitor willturn off and the television will display theimage normally shown in the monitor.
