2! ~. \ 'I,;, 'I:IVI rIIn the autofocus mode, position autofocus sensor area onsubject, lightly press shutter release button and confirm in-focus indicator LED (e ) appears in the viewfinder. (In FocusTracking, the in-focus LED does not appear - see page 37.)Keep your hands off the lens focus ring when the focus modeselector is set to S or C.If ( ~ ) does not disappear, the subject is closer than the closestfocusing distance of the lens in use. Move back from thesubject.24In the S (Single Servo Autofocus) mode, the shutter can bereleased only when the in-focus indicator LED appears; oncethe LED appears, focus is locked as long as the shutter releasebutton is lightly pressed.If the subject moves and the focusing distance changes,refocus by briefly removing finger from shutter release buttonand lightly pressing again to reactivate autofocus operation, oruse Continuous Servo Autofocus mode or Focus Tracking. Seepages 35 and 37.