Nikon F60 Instruction Manual
                                         | |
Contents
| 
Load FilmBASIC OPERATION18 1933.13.23.3i Only DX-coded film can be used with this camera. When film other thanDX-coded film is inserted, T blinks and fl appears on the LCD panel.i Shutter curtains are very thin. Make sure not to touch the shuttercurtains with your finger or film leader.i Film load can be confirmed on the LCD panel.i When changing film outdoors, avoid direct sunlight.y Check pointsUse a DX-coded film. Film speedis set automatically (ISO25-5000).When the camera is turned on,film is loaded and the cameraback is closed, the film automat-ically advances to the first frame.Turn on the main switch, then open the camera backand insert film.• Insert from the bottom of the film cartridge.• Do not insert the film leader beyond the red index mark.• Hold the film cartridge and ensure film is properly positioned with noslack.Pull film leader out to red index mark.• When T and 1 appear on the LCD panel, the film has advanced to the firstframe.• When ‹ and T blink on the LCD panel, film is not properly installed.Open the camera back again and reload film.• Film is automatically rewound when the film reaches the end of the roll.(See page 27.)• Number of available exposures of the film roll can be checked through thefilm cartridge confirmation window.Gently close the camera back until the lock releasesnaps closed. Film automatically advances to firstframe.ISO (filmspeed)DX markNOTE: Loading/removing filmShutter curtains are very thin. Make surenot to touch the shutter curtains withyour finger or film leader.F60 (E) 02.12.27 5:34 PM Page 18WWW.LENSINC.NET |
Related manuals for Nikon F60
manualsdatabase
Your AI-powered manual search engine