17Inserting the batteryUse one LR03 (AAA-size) alkaline battery.The supplied battery is for testing purposes only, and has a short battery life.1) As in Fig. 1, rotate the battery compartmentcover on the tip of the handle in the direction ofthe arrow (t) (counterclockwise), and remove it.(Fig. 1)2) Insert the battery as in Fig. 2 so that the + pole(with the protrusion) goes into the slot.* Be sure to insert the battery in the correctdirection.(Fig. 2)*1EN3) As in Fig. 3, align the protrusions of the batterycompartment cover with the indentations on thehandle, insert it (1), and rotate it clockwise untilit clicks and locks (2).Confirm that the light turns on. If it does not turnon, check the direction of the battery and thedirection of the lighting unit. (Fig. 3)About cleaningDo not wash this product with cold or hot water.Gently wipe off dirt from this product (except for the lens) by using a soft, clean cloth. Donot use organic solvents such as benzene, thinner, or any cleaning solution that includesorganic solvents, etc.Remove dust from the faces of the lens with a soft, non-oily brush.Remove fingerprints, etc., from the faces of the lens by gently wiping them with cleaningpaper or a soft cleaning cloth that has been dampened with a small amount of anhydrousalcohol (ethanol) or commercially available lens cleaner.••••