51.Unscrew the camera's motordrive coupling cover.First make sure the camera'spower switch is turned off. Thenturn the camera upside down anduse a coin to unscrew thecover.Remove the motor drive'sbattery clipG). Slide the re-lease catch ~to the right andthe battery clip will pop out.2.Remove the motor drive's bat-tery clip(13).Slide the release catch (25)tothe right and the battery clipwill pop out.3.Store the cover in thecompartment (16) provided.To prevent the cover from beingmisplaced, slip it into the stor-age compartment on the end of thebattery clip. To remove the motordrive coupling cover, push thesmall catch to the outside as youturn the battery clip upside down.The cover will then fall out.BASIC OPERATION