3Getting Started• Press the battery-chamber/memory card slot cover latch release (1) and rotatethe battery-chamber/memory card slot cover latch (2) to open the cover (3).• With the battery’s positive and negative terminals oriented correctly, move theorange battery latch (4), and fully insert the battery (5).• Slide the memory card in until it clicks into place (6).• Be careful not to insert the battery or memory card upside-down or backward, asthis could cause a malfunction.• Close the battery-chamber/memory card slot cover (7) and, while pressing itfirmly against the camera so that the red portion on the side of the cover is hidden,rotate the battery-chamber/memory card slot cover latch until it clicks into place(8).Make sure that the cover is securely locked.• If the write-protect switch of the memory card is locked, you cannot shoot, deleteimages, or format the memory card.• Camera data, including images and movies, can be saved either on a memory cardor in the internal memory. To use the internal memory, remove the memory card.B Notes About Waterproof and Dustproof PerformanceSee “Notes About Shockproof, Waterproof, and Dustproof Performance” (Ax) for moreinformation.B Notes About Closing the Cover without Getting the Camera Strap’s CordCaughtIf the camera strap’s cord gets caught in the battery-chamber/memory card slot cover whenit is closed, the cover could be damaged. Before closing the battery-chamber/memory cardslot cover, make sure that the cord does not get caught in it.Inserting the Battery and Memory Card132 45876Battery latch Memory card slot