Nikon coolpix s6600 User Manual

Also see for Coolpix S6600: Reference manual Quick start guide

Contents

82Using the Wi-Fi (Wireless LAN) Function3 Set the Wi-Fi setting on the smart device to On.• Check the user’s manual provided with your smart device for further details.• After the network name (SSID) that can be used for the smart device is displayed, select theSSID displayed on the camera.• When the message for entering a password is displayed, enter the password that isdisplayed on the camera.• When the camera is successfully connected to a Wi-Fi network, the shooting screen isdisplayed with the Wi-Fi icon (A7).4 Start the dedicated software installed on the smart device.• The screen for selecting “Take photos” or “View photos” is displayed.• When the message “Cannot connect to camera.” is displayed, retry the Wi-Fi networksetting.To Terminate the Wi-Fi Connection• Turn off the camera.• Set the Wi-Fi setting on the smart device to Off.B Notes About Wi-Fi Connection• Set the Wi-Fi network to Off in a place where the use of radio waves is prohibited.• When a memory card is not inserted in the camera, the Wi-Fi function cannot be used. WhenEye-Fi card (E87) is inserted in the camera, the Wi-Fi function cannot be used.• When Wi-Fi is connected, Auto off is disabled.• When the Wi-Fi network is set to On, the battery drains faster than normal.• The Wi-Fi network cannot be selected when the battery level indicator in the monitor indicatesB. In addition, if the battery level indicator indicates B while a Wi-Fi connection is established,the connection is terminated.C Notes About Security SettingsIf the camera is installed with the Wi-Fi function without proper security settings (encryption andpassword), unauthorized third parties may access the network and cause harm. We stronglyrecommend performing the required security settings before using the Wi-Fi function.Use Wi-Fi options of the setup menu (A79) to perform the security settings.