4MyAmplifiers.com - +44 977215553 (UK) , +33 977215553 (France),E-mail: contact@myamplifiers.com - Skype: gsm_amplifierwww.myamplifiers.com5. Operation instructions5.1. Descriptions of the overall dimension of the equipmentThe whole-set shape is shown as follows: RF Port BTS Port (Uplink input, Downlink output)connected with reverse antenna facing to the basestation. RF Port User’s Port (Uplink input, Downlink output)connected with indoor covering system Install Bracket Power interface Power indicator light5.2 Instructions on installation1. Firstly, select an appropriate position to mount. Thesignal amplifier is better to be mounted close towalls. At the position selected, punch a hole in thewall as shown in the diagram and aim the bolt at thehole. Then fasten and fix with expansion bolts.2. Connect the BTS Port (in the diagram) with out doorreverse antenna through radio frequency cable. Ingeneral, the reverse antenna is mounted at a higherposition. Yagi antenna and panel antenna may beused. The main lobe of the antenna radiation isoriented towards the base station and the reverseantenna and base station antenna should be visibleas possible.3. Connect User’s Port (in the diagram) with the portsof indoor covering system or indoor relay antenna.In general, the indoor covering system is composedof several splitters, couplers, expansion amplifiersand antennas and applied as per specificengineering design for the purpose of satisfying thesignal covering demands in large area orcomplicated terrain indoor space. In the case ofsmall area indoor space, the requirements forcovering can be satisfied by using single relayantenna with the option of hanging antenna orceiling antenna.4. Finally, connect the power interface shown as in thediagram to 5V8A power adapter and power on theadapter with 220v AC. The signal amplifierinstallation is thus completed.