Nilfisk-ALTO ATTIX 40-0M TYPE 22 Operating Instructions Manual

Contents

Nilfisk-ALTO ATTIX 40-0M TYPE 22 Operating Instructions Manual Manual pdf 16 page image

15ATTIX 40-0M PC TYPE 221) OEL values = Occupational Exposure Limit*) Optional accessories / Option depending on modelOriginal instructionGBITCSFIBGKOSLDENOPLLVFRSVHULTELESHRNLDAROZHTRPTSKRUET7 Maintenance7.1 Maintenance planAfter finishing work When required7.2.1 Emptying dirt tank 7.2.2 Replacing the disposal bag 7.2.3 Replacing the filter bag 7.2.4 Replacing filter element (Push&Clean) 7.2.5 Replacing motor cooling filter 7.2 Maintenance work7.2.1 Emptying the dirt tankAfter emptying the tank: clean therim of the tank and the seals in theintermediate ring and the uppersection of cleaner before refittingthem.If the seal or groove is dirty or dam-aged, the suction performance willbe reduced.Before reinserting the suction hose:clean the inlet fitting and hose collar.1. Switch off the vacuum clean-er and pull the mains plugout of the socket.2. Open the retaining clamps (A)and remove the upper sec-tion of the vacuum cleaner.3. Tip out the collected dirt.4. Dispose of the dirt in accord-ance with legal regulations.5. Attach the upper section ofthe vacuum cleaner.6. Close the retaining clamps(A). Ensure that the retainingclamps fit properly.32273638øøøøA A32273638øøøøA A