Nilfisk-ALTO ATTIX 791-2M/B1 Operating Instructions Manual

Contents

Nilfisk-ALTO ATTIX 791-2M/B1 Operating Instructions Manual Manual pdf 10 page image

8ATTIX 791-2M/B16 After finishing work6.1 Switching the vacuumcleaner off and storage1. After picking up hazardousdust, vacuum clean the out-side of the cleaner.2. Switch off the vacuum clean-er and pull the mains plugout of the socket.3. Wind up the power cord andhang it on the handle.4. Empty the tank and clean thevacuum cleaner.5. After picking up liquids: Storethe upper section of thecleaner separately so thatthe filter element can dry.6. Store the vacuum cleanerin a dry room where it isprotected from unauthorizeduse.7 Maintenance7.1 Maintenance planWhen replacingthe filter bag,waste bag or filterelementAfter finishingworkAs required7.2.1 check the antistaticClamps7.2.2 Replacing the waste bag7.2.3 Replacing the filter bag7.2.4 Emptying the dirt tank7.2.5 Replacing filter element7.2.6 Replace the filter for airsupply to motor7.2 Maintenance work7.2.1 check the antistaticclamps1. Check the anti-static clamps(1) for dam-age and havethem replacedby Nilfisk-AltoService if nec-essary.Do not use the cleaner withdamaged or missing antistaticclamps. Risk of explosion dueto static discharge in explosiveatmospheres.11 111