Nilfisk-ALTO ATTIX 961-01 Operating Instructions Manual

Also see for ATTIX 961-01: Bruksanvisningen Quick start guide Operating instructions Repair manual

Nilfisk-ALTO ATTIX 961-01 Operating Instructions Manual Manual pdf 24 page image

23ATTIX 9 STD1) Optional accessories / Option depending on model7.2.6 Replacing filter elementNever use the vacuum cleanerwithout a filter.1. Switch off the vacuum clean-er and pull the mains plugout of the socket.2. Apply parking brakes (A) onboth castors.3. Open the retaining clamps(B) and remove the uppersection of the vacuum clean-er.Removing the filter element:4. Lay the upper section of thecleaner down with the fi lterelement facing upwards.5. Open the bar handle (C) andremove it.6. Remove the filter holder (D).7. Carefully remove the filter el-ement (E).8. Dispose of the used filter ele-ment in accordance with le-gal regulations.Inserting the filter element:9. Clean the filter seal (F).Check it for damage and re-place it if necessary.10.Check the antistatic pin (G)for damage. If necessary,have it replaced by Alto Serv-ice.11.Push new filter element (E)onto the filter holder.12.Attach filter holder (D).13.Attach bar (C) and close.14. Attach the upper section of thevacuum cleaner.15. Close the retaining clamps(B). Ensure that the retainingclamps fit properly.AAB BB BCDEE F GCD