Nilfisk-ALTO FLOORTEC R 870 Service Manual

Contents

Nilfisk-ALTO FLOORTEC R 870 Service Manual Manual pdf 26 page image

General Information26Service Manual – Floortec R 870Scheduled Maintenance Table (Floortec R 870 Petrol/LPG)Procedure UpondeliveryEvery10hoursEvery50hoursEvery100hoursEvery200hoursEveryyearEngine oil level check (1)Battery fluid level check (2)Side and main broom height checkEngine air filter check (1)Service brake cable adjustment (3)Hopper dust filter check and cleaning (“A” method) (4)Hopper hydraulic lifting system oil level check (2)Skirt height and operation checkDust guard system water filter check and cleaningEngine air filter cleaning (4) (4)Hopper dust filter check and cleaning (“B” method) (4)Filter shaker operation checkMain broom driving belt visual inspectionBrake replacementEngine oil change (5) (6)Spark plug check/cleaningNut and screw tightening check (6)Steering chain cleaning (*)Safety system operation check (2)Engine filter trap cleaningEngine baffle plate cleaningFuel filter cleaning (7)Brake pad check/adjustment/replacement (3)Hopper dust filter check and cleaning (“C” method) (4)Main broom driving belt replacementHopper gasket integrity checkLifted hopper sensor operation check/adjustmentFuel valve filter cleaning (Petrol)Engine paper air filter replacementSpark plug replacementEngine idle speed check/adjustmentValve clearance check/adjustment (7)Hydraulic system oil change (8)Supply hose replacement (LPG)Engine combustion chamber check Every 500 hours (7)Fuel hose check/replacement (Petrol) Every 2 years (7)(1) Daily or after using the machine(2) Or before start-up(3) Or more frequently if the machine is used on slopes(4) Or more often in dusty areas(5) Or every 6 months(6) And after the first 20 running-in hours.(7) Maintenance procedures to be performed by an authorised Honda dealer(8) Change the hydraulic system oil for the first time after 500 hours, then every 2,000 hours or every year.