BU800 Battery Burnishers How ToPrepare for use1 Unplug battery charger.Wrap cord accordingly.2 Check/inspect bag.Replace bag if needed.3 Remove the skirt.4Inspect pad for wear.5 Turn pad retainercounter clockwise toremove the pad.6Install new pad andcenter on outsidediameter of the paddriver.7Tighten pad retainer inclockwise direction.8Prep area to removedebris.9Turn the key switch toturn the machine on.Check battery power.10 Palm buttons power thepad drive and causesthe pad to spin andlower to the floor(models without traction).11 Turn on pad powerswitch. Press palmbuttons to drivemachine and lower padto the floor (traverse models)12Press the speed controlbutton to adjust traversespeed.Press the reverse buttonwhile pressing palm buttonsto move the machine inreverse

Nilfisk-Advance BU800 How-to Manual