Nilfisk-Advance CA 331 User Manual

Also see for CA 331: Specifications

Contents

Nilfisk-Advance CA 331 User Manual Manual pdf 36 page image

ENGLISH USER MANUAL2 9097264000(1)2008-02 A CA 331INTRODUCTIONNOTEThe numbers in brackets refer to the components shown in Machine Description chapter.Thank you for choosing a Nilfisk scrubber-dryer.Nilfisk scrubber-dryer CA 331 is an efficient and superior quality machine for floor cleaning.The machine is equipped with two turning brushes for a cleaning width of 330 mm.Front and rear squeegees clean out the floor, while a vacuum system collects the dirty water, all in one wipe.MANUAL PURPOSE AND CONTENTSThe purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe andautonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. ContactNilfisk in case of doubts regarding the interpretation of the instructions and for any further information.TARGETThis Manual is intended for operators and technicians qualified to perform the machine maintenance.The operators must not perform procedures reserved for qualified technicians. Nilfisk will not be answerable for damages comingfrom the non-observance of this prohibition.HOW TO KEEP THIS MANUALThe User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can causedamage to it.DECLARATION OF CONFORMITYThe Declaration of Conformity, supplied with the machine, certifies the machine conformity with the law in force.NOTETwo copies of the original declaration of conformity are provided together with the machine documentation.IDENTIFICATION DATAThe machine model and serial number are marked on the plate (1).The machine production year is written in the declaration of conformity and it is also indicated by the first two figures of the machineserial number.This information is useful when requiring machine spare parts. Use the following table to write down the machine identification data.MACHINE model ...............................................................................MACHINE serial number ...................................................................OTHER REFERENCE MANUALSSpare Parts List (supplied with the machine)Service Manual (that can be consulted at Nilfisk Service Centers)SPARE PARTS AND MAINTENANCEAll necessary operating, maintenance and repair procedures must be performed by qualified personnel or by Nilfisk ServiceCenters. Only original spare parts and accessories must be used.Contact Nilfisk for service or to order spare parts and accessories, specifying the machine model and serial number.CHANGES AND IMPROVEMENTSNilfisk constantly improves its products and reserves the right to make changes and improvements at its discretion without beingobliged to apply such benefits to the machines that were previously sold.Any change and/or addition of accessory must be approved and performed by Nilfisk.––