Nilfisk-Advance Convertamatic 24 Service Manual

Also see for BA 625: Instructions for use Instructions for use

Contents

Nilfisk-Advance Convertamatic 24 Service Manual Manual pdf 17 page image

FORM NO. 56043098 - Convertamatic ™ 24, 26, 28, 32 / BA 625, 725, 825 - 15SOLUTION SYSTEMSOLUTION SYSTEM MAINTENANCE• Solution Tank: See Figure 1. Weekly empty the solution tank; remove the solution Drain Hose (B) from its storage area (located on the right rear control handlecompartment). Direct the hose to a designated “Disposal Site” and flush the tank with clean water.• Solution Filter: Remove and clean the inline Solution Filter (C). To access the filter housing for removal, work underneath the middle left side chassis panel. Notools are needed to remove the filter (hand tighten only). Service Tip: The solution filter ball valve must be placed in the OFF (Closed) position. This prevents lossof solution when servicing the fi lter strainer with a partial or full tank.• Solution Delivery Trough: On the cylindrical scrub deck clean the holes in the delivery trough to assure even distribution of solution.TROUBLESHOOTING GUIDEProblem Possible CauseInadequate or no solution fl ow No solution in the tankSolution tank fi lter ball valve in the off positionClogged solution fi lter, valves and hoses*Reference the Solution System Troubleshooting Guide fl owchart in this manual section for further component diagnostics.