Nilfisk-Advance E 130.3 User Manual

Also see for E130.3 X-TRA: User manual Repair manual

Contents

Nilfisk-Advance E 130.3 User Manual Manual pdf 11 page image

11Original InstructionsENDANOSVFIDEFRNLITESPTELTRCSHUPLHRSLSKLVLTETRUZH4 Operating your high pressure washerSee the pictorial quick reference guide – operating your high pressure washer.4.1 Connection of high pressure hoseB1 Attach the high pressure hose (4) to the spray handle (7). Detach the high pressure hoseby pressing the pawl (A).B2 Mount the high pressure hose on the outlet (3).4.2 Mounting of spray lance and Click&Clean nozzlesB3 Push the spray lance (6) into the spray handle (7), twist and release.NOTE!The spray lance has a built-in low pressure nozzle that can be used for fl ushing awaydirt.B4 When attaching the nozzles (8, 9), press the nozzles into the spray lance.IMPORTANT!When attaching the click & Clean nozzles, the pawl on the side of the spray lance should comeout again. The nozzle should stay in position when pulling it.B5 Push the foam sprayer (10) into the spray lance (6).NOTE!The foam sprayer features a swivel lock, which must be positioned in the hole in the Click &Clean spray lance. Press the pawl to detach the Click & clean nozzles and the foam sprayer.IMPORTANT!Before starting the cleaning job, check that the machine is in an upright position and placed onan even surface. Do not place the machine in long grass!4.3 Water ConnectionIMPORTANT!Connecting to pressurized water supplyThe inlet water max. pressure is 1 MPa/10 bar and the max. temperature is 60°C – see ratingplate. An ordinary ½" garden hose of min. 10 m and max. 25 m will be suitable.B6 Check that the fi lter is fi tted in the water inlet pipe and that it is not clogged up.B7 Connect the water hose to the water supply by means of the quick connector. Turn on thewater.Connection to the drinking water mains according to national and local regulations.Let the water run through the water hose before connecting it to the machine to prevent sandand dirt from penetrating the machine.B8 Turn off the water and connect the water hose by means of the quick coupling to the wa-ter inlet.Connecting to pressure less water supplyThe machine can also operate in suction mode, meaning that you can connect the machine toe.g. rainwater vessels, rivers, lakes and cisterns etc. When taking in water from non drinkingwater mains the backfl ow preventer is not needed.B