Nilfisk-Advance SC3000 Instructions For Use Manual

Also see for SC3000: Service manual Service manual Instructions for use

Nilfisk-Advance SC3000 Instructions For Use Manual Manual pdf 10 page image

8 9098827000(2)2010-12 SC3000 26” Disc / 28” Cyl.ENGLISH INSTRUCTIONS FOR USESTEERING WHEEL WITH CONTROL PANELReverse gear activation/deactivation lever51.Reverse gear LED indicator52.Detergent flow control switch (*)53.Washing detergent flow control switch LED indicator (*)54.Mute function switch55.Mute function switch LED56.Horn switch57.Ignition key58.Solution flow increase switch59.Solution flow decrease switch60.Solution flow indicator61.Battery warning lights62.Green warning light - charged battery•Yellow warning light - semi-discharged battery•Red warning light - discharged battery•Vacuum system switch63.Vacuum system LED indicator64.Extra pressure switch (the switch is enabled on 28” Cyl.65.version only)Extra pressure LED indicator66.Brush/pad-holder deck and squeegee lifting/lowering67.switchBrush/pad-holder deck and squeegee lifting/lowering LED68.indicatorEcoFlex™ activation/deactivation lever (*)69.EcoFlex™ system LED indicator (*):70.LED on - EcoFlex™ system on•LED flashing - EcoFlex™ system override•LED off - EcoFlex™ system disabled•Hour counter and solution level display:71.When the machine is started, it displays for a few•seconds the number of working hours which have beenperformed.While using the machine, it displays the solution/•washing water level in the tank (in gallons).When the level is above 18 USgal, the display indicates•“FUL”.When the level is under 4 USgal, the display indicates•“LO”.When the tank is almost empty, “LO” starts flashing.•NOTEThe display could indicate “LO” even if the tank isnot completely empty, thus allowing to completethe cleaning cycle; in any case, it is recommendedto check the actual solution flow supplied to thebrushes.Anti-skid control activation LED indicator72.Only for machines with EcoFlex™ system(*)52545356555157585960727071686765696663646261P100360