Nilfisk-Advance SC8000 Instructions For Use Manual

Also see for SC8000: Instruction manual Instructions for use Instructions for use Instructions for use

Contents

Nilfisk-Advance SC8000 Instructions For Use Manual Manual pdf 3 page image

3/13 A - 356091081 - SC8000ENGLISH - AINSTRUCTIONS FOR USEINTRODUCTIONThis manual will help you get the most from your Nilfisk Rider Scrubber. Read it thoroughly before operating the machine.Note: Bold numbers in parentheses indicate an item illustrated on pages 6 – 9.PARTS AND SERVICERepairs, when required, should be performed by your Authorized Nilfisk Service Center, who employs factory trained service personnel, and maintains an inventoryof Nilfisk original replacement parts and accessories.Call the NILFISK DEALER named below for repair parts or service. Please specify the Model and Serial Number when discussing your machine.MODIFICATIONSModifications and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer or user without prior writtenapproval from Nilfisk-Advance Inc. Unapproved modifications will void the machine warranty and make the customer liable for any resulting accidents.NAME PLATEThe Part Number and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering repair parts for themachine. Use the space below to note the Part Number and Serial Number of your machine for future reference.PART NO. _____________________________________________________________SERIAL NO. ___________________________________________________________UN-CRATINGUpon delivery, carefully inspect the shipping crate and the machine for damage. If damage is evident, save all parts of the shipping crate so that they can beinspected by the trucking company that delivered the machine. Contact the trucking company immediately to file a freight damage claim.1 After removing the crate, remove the wooden blocks next to the wheels.2 Check the engine oil and coolant levels.3 Check the hydraulic oil level.4 Read the instructions in the Preparing the Machine For Use section of this manual, then fill the fuel tank.5 Place a ramp next to the front end of the pallet.6 Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the machine forwarddown the ramp to the floor. Keep your foot lightly on the brake pedal until the machine is off the pallet.CAUTION!Use extreme CAUTION when operating this machine. Be certain that you are thoroughly familiar with all operating instructions beforeusing this machine. If you have any questions, contact your supervisor or your local Nilfisk Industrial Dealer.In the event of an accident or equipment breakdown, do not attempt to correct the problem. Have a qualified company mechanic oran authorized Nilfisk Dealer Service person make any necessary corrections to the equipment.Use extreme care when working on this machine. Loose clothing, long hair, and jewelry can get caught in moving parts. Turn the KeyIgnition Switch OFF and remove the key before servicing the machine. Use good common sense, practice good safety habits andpay attention to the yellow decals on this machine.Drive the machine slowly on inclines. Use the Brake Pedal (23) to control machine speed while descending inclines. DO NOT turnthe machine on an incline; drive straight up or down.The maximum rated incline for sweeping and scrubbing is 10.5%(6°). The maximum rated incline during transport is16%(9°).