ENGLISH USER MANUAL2 1463388000(1)2008-05 A SR 1301 PINTRODUCTIONNOTEThe numbers in brackets refer to the components shown in Machine Description chapter.MANUAL PURPOSE AND CONTENTSThe purpose of this Manual is to provide the operator with all necessary information to use the machine properly in a safe andautonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.Before performing any procedure on the machine, the operators and qualified technicians must read this Manual carefully. ContactNilfisk in case of doubts regarding the interpretation of the instructions and for any further information.TARGETThis Manual is intended for operators and technicians qualified to perform the machine maintenance.The operators must not perform procedures reserved for qualified technicians. Nilfisk will not be answerable for damages comingfrom the non-observance of this prohibition.HOW TO KEEP THIS MANUALThe User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can causedamage to it.DECLARATION OF CONFORMITYThe declaration of conformity, supplied with the machine, certifies the machine conformity with the law in force.NOTETwo copies of the original declaration of conformity are provided together with the machine documentation.IDENTIFICATION DATAThe machine model and serial number are marked on the plate (1).The machine model year is written in the declaration of conformity and it is also indicated by the first two figures of the machineserial number.The petrol engine model and serial number are marked on the plate (33).This information is useful when ordering machine and engine spare parts. Use the following table to write down the machine andengine identification data for any further reference.MACHINE model ...............................................................................MACHINE serial number ...................................................................ENGINE model ..................................................................................ENGINE serial number ......................................................................OTHER REFERENCE MANUALSPetrol Engine Manual, supplied with the machine, to be considered an integral part of this Manual.–Moreover, the following Manuals are available:–Spare Parts List (supplied with the machine)•Service Manual (that can be consulted at Nilfisk Service Centers)•SPARE PARTS AND MAINTENANCEAll necessary operating, maintenance and repair procedures must be performed by qualified personnel or by Nilfisk ServiceCenters. Only original spare parts and accessories must be used.Contact Nilfisk for service or to order spare parts and accessories, specifying the machine model and serial number.
