Nilfisk-Advance SR 1601 D3 User Manual

Also see for SR 1601 D3: User manual

Contents

Nilfisk-Advance SR 1601 D3 User Manual Manual pdf 93 page image

USER MANUAL ENGLISH33019216 - SR 1601 D3 / LPG3 / P3 23SCHEDULED MAINTENANCE TABLENOTEMaintenance intervals given are for average operating conditions. Machines used in severe operational environmentsmay require service more often.Procedure Upon delivery DailyAfter thefirst 50hoursEvery 30hoursEvery150hoursEvery300hoursEvery1,000hoursEngine coolant checkEngine oil level checkHydraulic oil level checkParking brake checkMain and side broom cleaningEngine oil change (1) (1)Oil filter element replacement (1) (1)V-belt check (1) (1)Engine coolant circuit check (1)Battery checkDust guard system water filter check andcleaning (optional)Engine air filter cleaning (2)Engine radiator and oil cooler cleaningBroom check and adjustmentHopper dust filter check and cleaning (“A”method) (2)Skirt integrity, height and operation checkHopper gasket integrity checkEngine maintenance (1) - (3)Steering wheel bearing and hydraulic pistonlubrication (1)Tank hydraulic oil filter replacement (1)Pump hydraulic oil filter replacement (1)Hopper dust filter check and cleaning (“B”method) (2)Fuel filter replacement (1)Fuel fitting and screw tightening (1)Hopper dust filter check and cleaning (“C”method) (2)Supply hose replacement (LPG3) (1)Hydraulic oil “recharge” filter replacement (1)Tank hydraulic oil change (1) - (4)(1) For the relevant procedure, see the Service Manual.(2) Or more often in dusty areas.(3) Maintenance procedures to be performed by an authorised KUBOTA dealer.(4) Change the hydraulic oil for the first time after 500 hours, then every year.