USER MANUAL14 33014816(1)2005-07 ACLEANING AND MAINTENANCEThe machine cleaning can be carried out by non-specializedpersonnel. However, the person in charge of the cleaningshould be familiar with the energy source cut-off maincontrols and the main features of the machine to avoid anydangerous situation.The machine maintenance should be carried out by highlyskilled personnel, with a deep knowledge of the machine andits components.Mechanical, electrical and electronic maintenance ispossible.CLEANINGMachine general cleaningClean the coating, panels and controls of the machine with asoft cloth, either dry or lightly soaked in a mild detergentsolution.Remove traces of dust and other dirt from the machine controlpanels (digital displays, indicator and warning lights,switches).If necessary, the electrical components should be cleanedonly by specialized personnel and non-corrosive productssuitable for electric circuits should be used.PERIODICAL MAINTENANCEFor the engine maintenance, please follow the instructionsprovided in the Use and Maintenance Manual concerning theengine installed on the sweeper. This manual comes in aspecial case.Recommended periodical maintenance operations aresummarized in this table.MAINTENANCE TABLEWARNING!Any cleaning and maintenance operationshould be carried out with the machine off.Wait for all the parts to stop and cool down.WARNING!Protect eyes and hair when cleaning themachine with compressed air guns.If the machine is working in a toxicenvironment, wear a special mask andadequate protective clothing when carryingout maintenance work on the dust filter.NOTEDo not use solvents such as alcohol, petrol orethyl acetate as they could damage thesurfaces.NOTEPay attention when cleaning the electricalcomponents.WARNING!Any cleaning and maintenance operationshould be carried out with the machine off.Wait for all the parts to stop and cool down.Maintenance Every 10hoursEvery 20hoursAfter 50hoursEvery 150hoursEvery 300hoursEvery1,000hoursEvery2,000hoursHydraulic oil level checkClosed pocket filter cleaningBattery checkBrake fluid level checkBattery checkDust control system water filter checkGear pump hydraulic oil filter replacementHydrostatic pump hydraulic oil filter replacementHydrostatic pump hydraulic oil filter replacementScrew tighteningHydraulic oil changeMotor carbon brush checkHydraulic motor and pump pressure checkBrake system checkMoving part clearance check