Nilfisk-Advance SW 700 P Operating Instructions Manual

Contents

26S31NUK5080(2)2001-01CONTROL EVERY30 hEVERY50 hEVERY100 hEVERY500 hUP ONDELIVERYCheck the carbon brushes of theelectric motor, and replace them ifworn-outBattery liquid level andvoltageBelt tighteningFilter shakerNut and screw tighteningSide and centralbrush conditionPanel filter cleaningFilter, gasket seal, flapsOR EVERYTWO WEEKSControl devices cableadjustmentWarning: these operations must be carried out with the machine off and the key switchedoff.All periodic or extraordinary maintenance operations must be performed by skilled per-sonnel, or by an authorised service centre.Note: The battery life will depend on the level or periodic maintenance (checking the electro-lyte level and density). If the machine does not run for a long time (ex. 4 to 6 weeks) itwill be necessary to recharge the batteries to make sure that their voltage does not gounder 9,5 Volt. Infact unused batteries get a self-discharge.SUMMARY TABLE(battery-operated version maintenance)