Nilfisk-Advance SelectGloss 21P 56010814 Operator's Manual And Parts List

Contents

VI. TROUBLESHOOTINGSYMPTOM POSSIBLE CAUSES1. Hard to Start Spark plug or head bolts loose. Blown headgasket. Insufficient vacuum. Coil, air gap needsadjusting. Low oil.2. Will Not Start No fuel, Blown head gasket, Insufficient vacuumDefective Spark Plug, Defective coil, Dirty airfilter, Low oil.3. Engine lacks power Leaking head gasket. Insufficient vacuum.Governor needs adjusting. No compression -worn rings. Check air filters.4. Smell of burned rubber Belt out of adjustment or not aligned properly.5. Machine vibrates Loose bolts. Pad not centered.6. Machine "Bogs Down" When in Use Operator is bearing down too hard. Dirty airfilters.7. Machine Pulls To One Side Check for bent wheel bracket.8. Engine stops running Dirty air filter, High exhaust emissions, Out offuel, Low oil.* Insert lever bolt through handle bracket and hinge bushing to locate handle in operatingposition.7D. Adjusting the Handle

/ 15

Related manuals for Nilfisk-Advance SelectGloss 21P