ENGLISH USER MANUAL2 146 3080 000(1)2006-10 A SW 750INTRODUCTIONNOTEThe numbers in brackets refer to the components shown in Machine Description chapter.MANUAL PURPOSE AND CONTENTSThe purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safeand autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts anddisposal.Before carrying out any procedure on the machine, the operators and qualified technicians must read this Manual carefully.Contact Nilfisk-Advance in case of doubts regarding the interpretation of the instructions and for any further information.TARGETThis Manual is intended for operators and technicians qualified to perform the machine maintenance.The operators must not carry out procedures reserved for qualified technicians. Nilfisk-Advance will not be answerable fordamages coming from the non-observance of this prohibition.HOW TO KEEP THIS MANUALThe User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that cancause damage to it.DECLARATION OF CONFORMITYThe Declaration of Conformity, supplied with the machine, certifies the machine conformity with the law in force.NOTETwo copies of the original EC Declaration of Conformity are provided together with the machine documentation.IDENTIFICATION DATAThe machine model and serial number are marked on the plate (33).The machine model year is written in the EC Declaration of Conformity and it is also indicated by the first two figures of themachine serial number.This information is useful when requiring machine spare parts. Use the following table to write down the machine identificationdata.MACHINE model ...............................................................................MACHINE serial number ...................................................................
