C385 4 04/2012VHC200 / VHC200EXPGBVacuum cleaner descriptionOptional kitsPlease contact the manufacturer’s sales network forinformation on optionals.Instructions for installing the optional are included in theconversion kit.WARNING!Use only supplied and authorized genuine spare parts.AccessoriesVarious accessories are available; refer to the manufacturer’saccessory catalogue.WARNING!Use only genuine accessories supplied andauthorized by the manufacturer.Packing and unpackingDispose of the packing materials in compliance with the lawsin force.Figure 2Model VHC200 VHC200EXPA (in) 27.6 27.6B (in) 47.2 47.2C (in) 66.9 66.9Weight with packing(lbs) 196 196Vacuum Cleaner Parts and LabelsFigure 11. Identification plate which includes:Model Code, Technical Specifications (see table on page7), Serial no. CE Marking, Year of manufacture2. Dust container3. Dust container release lever4. Inlet5. Outlet6. Attention plateDraws the operator’s attention to the fact that the filtermust only be shaken when the vacuum cleaner is turnedoff (see also par. “Primary filter shaker”).7. Pneumatic system connection fitting.This vacuum cleaner creates a strong air flow which is drawnin through the inlet (4 - Fig. 1) and blown out through theoutlet (5 - Fig. 1).Before turning on the vacuum cleaner, fit the vacuum hoseinto the inlet and then fit the required tool on to the end part(refer to the manufacturer’s accessory catalogue or ServiceCentre).The diameters of the recommended hoses are given in thetechnical specifications table.The vacuum cleaner is equipped with a primary filter whichenables it to be used for the majority of applications.Besides the primary filter, which retains the most commontypes of dust, the vacuum cleaner can be fitted with a HEPAfilter with a higher filtering capacity for fine dusts and duststhat are hazardous to health.