Nilfisk-Advance VL500 Instructions For Use Manual

Also see for VL500: Instructions for use

Contents

Nilfisk-Advance VL500 Instructions For Use Manual Manual pdf 10 page image

Original instruction103.1 Maintenance of the floatsystemRemove the electrical plug from the socket before performing main-tenance. Always empty and clean the container and the float systemafter picking-up liquids. Release the front latch by pulling it outwardsso that the motor top is released. Open up motor top from container.Then loosen the float basket by turning the basket to the left. Removethe complete float system from motor top. A filter is located in front ofthe motor inlet. Check this motor filter. Replace with new filter if filteris clogged. Wipe the float valve and float basket with a damp cloth be-fore the motor top is reinstalled to the container. Then reinstall the floatvalve to the float basket. Make sure that the sealed surface of the floatvalve is installed upwards in direction towards the motor top. To mountthe float basket - fit the arrow at the basket to the arrow. Then securethe float basket by turning it to the right.3.2 Maintenance4.2 Transport4.3 Storage4.4 Warranty4.5 Recycling the cleaner• Before transporting the dirt tank, close all the locks.• Eventually take off the motor top/container from the trolley(VL500 55/75).• Do not tilt the cleaner if there is liquid in the dirt tank.• Do not use a crane hook to lift the cleaner.Store the appliance in a dry place, protected from frost.Our general conditions of business are applicable with regard to theguarantee.Unauthorised modifications to the appliance, the use of incorrectbrushes in addition to using the appliance in a way other than for theintended purpose exempt the manufacturer from any liability for theresulting damage.Make the old cleaner unusable.1. Unplug the cleaner.2. Cut the power cord.3. Do not discard of electrical appliances with household waste.As specified in European Directive 2002/96/EC on old electricaland electronic appliances, used electrical goods must be collectedseparately and recycled ecologically.4.1 After use Remove the plug from the socket when machine is not in use. Wind upthe cord starting from the machine. The power cord can be wound uparound the handle/hooks located on the motor top or at the container.Some variants have special storage places for accessories.3 MaintenanceRemove the plug from the socket before performing maintenance.Before using the machine make sure that the frequency and voltageshown on the rating plate correspond with the mains voltage.Specifications and details are subject to change without prior notice.The accessories shown in the pictures may vary from model to model.Always keep the cleaner in a dry place. The cleaner is designed forcontinuous heavy work. Depending on the number of running hours –the dust filters should be renewed. Keep the container clean with a drycloth, and a small amount of spray polish.For details of after sales service contact your dealer.4 After using the cleaner