18Tourist 1NE-MASF333) Use APP Control the Aircraft(1) RecordingsYou can select one of the following two ways to control the aircraft to record:With APP: Click〖09〗 Video icon in control interface, the camera will start recording. Click on the icon again, recording stops.With Transmitter: Press 'A' button in the back of transmitter, the camera on the aircraft will start recording. When you need tostop recording, then press 'A' button, the recording ends.Once recording starts, the Video icon in the control interface begin flashing. It will stop when recording ends.NOTE: Before cutting off the aircraft power supply, please ensure recording stopped. Or else video can not besaved or can not be read.(2) Taking PicturesYou can choose either of the following two ways to control the aircraft to take pictures:With APP: Click 〖10〗 Picture icon in control interface [Figure 22], the camera will take one picture.With Transmitter: Press 'D' button in the the back of transmitter , one picture will be taken.4) Disconnect the Power Supply Of AircraftAfter flight, immediately remove lithium battery from battery compartment and store it separately.5) Data ReadingAfter shooting videos or photos, please read the data as follows:(1) Disconnect the aircraft battery;(2) Take off SD card;(3) Insert SD card into the reader;(4) Inserted card reader into computer's USB port;(5) Enter into the mobile memory under 'My Computer' , and read the data.