Nine Eagles SKY EAGLE Operating Instructions Manual

Also see for SKY EAGLE: Instruction manual

Contents

Nine Eagles SKY EAGLE Operating Instructions Manual Manual pdf 16 page image

16Operating instructions - SKY EAGLE RTF FTR 2.4 GHz No. NE2009FTR(Fig. 1) (Fig. 2)a(Fig. 3)Re-binding the transmitterThis procedure is only necessary if you replace individual components, or if you wish to bind a FUTABA transmitter (pleasealso read the point "Binding the receiver" in the operating instructions supplied with your FUTABA transmitter).1. Switch the transmitter on (Fig. 1) and connect the flight battery (Fig. 2). Ensure that the distance between the transmitterand the model is not greater than 25 cm.2. The green monitor LED on the receiver circuit board glows constantly. Locate the Bind button on the receiver (Fig. 3) andhold it pressed in for about three seconds, then release the Bind button. The model is now bound. This procedure maytake several seconds. Do not move the model or the transmitter sticks during the binding process.3. The green monitor LED continues to glow during the binding process. When the procedure is complete, the red monitorLED on the receiver glows constantly. The model can now be operated.