WindRunner™ self-balancing electric vehicle user manual36Display panel under normal mode(Rear LED off)4.3 Lock modeThis mode is effective only after the WindRunner is started and under standby, or power assistant mode (note:for safety reasons, it is unable to enter the lock mode under balance mode). Under standby mode or powerassistant mode, press “lock” on the intelligent remote key to activate the lock mode. If touched or handled byexternal force, its posture will change, and the whole mainframe of WindRunner shall strongly shake, give thealarm buzz, the tires will lock up, and will be difficult to tract.If the WindRunner is under this working mode for more than 12hor if the battery capacity is approximately used up, the systemshall be powered off automatically.
