06 07Check the Power ON/OFF status after assembly.For your safety, your miniPRO is not activated at this time and will beep occasionally after Power ON.Until activated, the miniPRO maintains a very low riding speed and steering sensitivity, and should notbe ridden. Install the Ninebot by Segway App on your mobile device (with Bluetooth 4.0 or above),connect to the miniPRO with Bluetooth, and follow the App instructions to activate your miniPRO andfollow the training procedures.6 First Ride5 Assembling Your miniPROScan to download the App iOS 5 or above, Android 4.3 or aboveUse your mobile device (Android or iOS) to install the Ninebot by Segway App,read the Safety Instructions, then follow the New Rider Tutorial before your firstride. Go to the Apple App Store (iOS) or the Google Play Store (Android) andsearch for "Ninebot" to download and install the App.1 Install App and register/login. Power ON the miniPRO. The Bluetooth iconblinking indicates the miniPRO is waiting fora connection.231 2 3Click “Search device” to connect to your miniPRO.The miniPRO will beep when the connection issuccessful. The Bluetooth icon will stop blinkingand remain illuminated.Follow the App instructions to learn how to ridesafely. Have fun!There are safety risks when learning to ride the miniPRO. You must read theSafety Instructions and follow the New Rider Tutorial in the Ninebot by SegwayApp before your first ride. Go to www.segway.com to watch the safety video.Open the tool-freerelease as shown.Insert the steering bar into themainframe steering socket. Close the tool-freerelease to secure.Rotate height adjustmentknob counter-clockwise. Lift the knee pads to desired height.Rotate height adjustment knobclockwise to tighten.Lift the guide bar to help steerthe miniPRO without a riderwhen powered on. Do not useto lift or carry the miniPRO.Adjust the knee pad heightInstall the steering barAndroidiOSWhen your miniPRO intermittently sounds an alarm, stop riding and check theApp for details.