Ninja BL200 series Owner's Manual

Contents

Ninja BL200 series Owner's Manual Manual pdf 11 page image

10www.sharkninjamanuals.comAssembly and Use for the Shredding/Slicing and Grating DiscsFig. 12 Fig. 14 Fig. 15On/OffSwitchIMPORTANT: Never feed food by hand. Always use thefood pusher to add food through the feeder tube on thefully assembled unit.IMPORTANT: Avoid contacting moving parts.1 Place the motor base on a clean, dry, level surface suchas a counter or table top.2 Align and lower the bowl onto the motor base. Handleshould be aligned slightly to the left of the “LOCK”symbol on the motor base.3 Rotate the container to the left as far as it will go to lockin place.4 Insert the spindle into the bowl. (Fig. 12)5 Hold the disc by the plastic hub and carefully placethe shredding/slicing disc or the grating disc onto thespindle. (Fig. 13)CAUTION: Shredding/Slicing Disc and Grating Disc are sharp! Handle with care. Make sure that the applianceis unplugged from the power source before inserting or removing the shredding/slicing or grating disc andbefore cleaning.Fig. 13Or6 Holding the lid by the feeder tube, place it on top of thebowl aligning the on/off switch with the bowl’s handle.(Fig. 14)7 Place food into the feeder tube. Using the food pusher,add food through the feeder tube. Push the on/offswitch forward to the “On” position. (Fig. 15)8 When you have finished slicing, shredding or grating,release the on/off switch to turn the appliance off. Waitfor the disc to stop turning and then remove the lid.9 Hold the disc by the hub to remove and then remove thespindle. Empty the food from the bowl.10 The spindle, shredding/slicing disc, grating disc, lid andfood pusher are all top rack dishwasher safe.CAUTION: SHREDDING/SLICING DISC ANDGRATING DISC ARE SHARP! HANDLE CAREFULLYWHEN CLEANING.