Ninja BL200UK series Owner's Manual

Contents

110800 862 0453HOW TO STORE1 Store the Ninja ® Kitchen System Pulse ® upright withthe 1L bowl on the motor base, 4-Blade assemblyinside and lid on the bowl. Secure the power cordunderneath the base by wrapping the cord around thecord wrap. Do not place anything on top. Store theNutri Ninja™ cups and the rest of the attachments alongside the appliance where they will not be damaged andwon’t cause a hazard.RESETTING THE MOTOR THERMOSTATThe Ninja ® Kitchen System Pulse ® features a unique safetysystem which prevents damage to the unit’s motor and drivesystem should you inadvertently overload your appliance.If the appliance is being overloaded, the motor will stop. Toreset the appliance, follow the resetting procedure below:1 Unplug the appliance from the electrical outlet.2 Remove and empty the container and ensure that nofood is jamming the cutting blades or attachments.3 Allow the appliance to cool for approximately 30minutes.4 Re-install the container onto the base and re-plug theappliance into the electrical outlet.5 Proceed to use the appliance as before making sure notto exceed the recommended maximum capacities.HOW TO CLEANCAUTION: Make sure that the motor base is unpluggedfrom the power source before inserting or removing anyattachment and before cleaning.CAUTION: DO NOT immerse the motor base into wateror any other liquid.1 Separate/remove all parts from each other.2 Clean the motor base and gear shaft with a damp clothand wipe dry.3 Place the bowl and Nutri Ninja™ cups in the dishwasher.Place the lids and attachments on the top rack. Usecaution when handling the blade assemblies as theblades are very sharp.NOTE: You may also wash the containers by filling thecontainer with no more than 700 ml of warm waterand a drop of dish washing detergent, placing thecorresponding lid on the container and pulsing a fewtimes. Do not fill the container with more than 700 mlof water because it will overflow. Once clean, removethe container from the motor base. Rinse the container,attachment and lid under running water. Allow all theparts to dry before storing.Care & Maintenance