Ninja BL450C Owner's Manual

Also see for BL450C: Owner's guide

Contents

Ninja BL450C Owner's Manual Manual pdf 16 page image

161-877-646- 5288Troubleshooting GuideReplacement PartsORDERING REPLACEMENT PARTSTo order additional parts and attachments, please visit our website: www.ninjakitchen.com or feel free to contact customerservice: 1-877-646-5288.PROBLEMS POSSIBLE REASONS & SOLUTIONSMotor doesn’t start orattachment doesn’t rotate.For the cups, make sure that the tabs are seated in the slots and turnedclockwise.Food is unevenly chopped. Either you are chopping too much food at once, or you are not pulsing properly.Reduce the amount of food in the cup.Food is too finely chopped or toowatery.The food has been over processed. Use short pulses for best results. Press downon the cup in short intervals.Cup is leaking.Make sure that your lid or blade assembly is properly assembled to the cup.Leaking may occur if it is misaligned when twisted onto the cup. Turn the lidtightly clockwise.Unit doesn’t turn on.Make sure the unit is plugged in.Rotate and press down on the cup to turn the unit on.Make sure the blade assembly is properly assembled to the cup and that it isnot misaligned.Unit doesn’t turn off. Unplug the power cord from the electrical outlet and call customer service forsupport.Doesn’t mix well.Pulse ingredients for best results. Press down on the cup in short intervals foreven blending and chopping. For frozen ingredients, pulse in short intervals of2-5 seconds and repeat.Lid/blade assembly will notproperly align to the cup.Set the cup on a level surface. Place the lid or blade assembly on top of the cupand align the threads so that the lid/blades sit flat on the cup. Twist clockwise sothat the lid/blades evenly align to the cup until you have a tight seal.