www.ninjakitchen.com15EnglishHOW TO STORE1 Store the Nutri Ninja™ Pro upright. Secure thepower cord underneath the base by wrappingthe cord around the cord wrap. Do not placeanything on top. Store the cups and the rest of theattachments along side the appliance where theywill not be damaged and won’t cause a hazard.RESETTING THE MOTOR THERMOSTATThe Nutri Ninja™ Pro features a unique safetysystem which prevents damage to the unit’smotor and drive system should you inadvertentlyoverload your appliance. If the appliance is beingoverloaded, the motor will stop. To reset theappliance, follow the resetting procedure below:1 Unplug the appliance from the electrical outlet.2 Remove and empty the cup and ensure that no foodis jamming the cutting blades.3 Allow the appliance to cool for approximately 30minutes.4 Re-install the cup onto the base and re-plug theappliance into the electrical outlet.5 Proceed to use the appliance as before whilemaking sure not to exceed the recommendedmaximum capacities.HOW TO CLEANCAUTION: Make sure that the motor base isunplugged from the power source before insertingor removing any attachment and before cleaning.CAUTION: DO NOT immerse the motor base intowater or any other liquid.1 Separate/remove all parts from each other.2 Clean the motor base with a damp cloth and wipedry.3 Place cups in the dishwasher. Place the lids andattachments on the top rack. Use caution whenhandling the blade assemblies as theblades are very sharp.NOTE: You may also wash the cups by filling thecup to the Max fill line with warm water and adrop of dish washing detergent, placing the bladeassembly on the cup and pulsing a few times. Donot fill the cup more than Max fill line with waterbecause it will overflow. Once clean, remove thecup from the motor base. Rinse the cup, attachmentand lid under running water. Allow all the parts todry before storing.If the appliance needs servicing, please callcustomer service at 1-877-646-5288.Care & Maintenance