Ninja BL450QUK series Owner's Manual

Also see for BL450QUK series: Owner's guide

Contents

Ninja BL450QUK series Owner's Manual Manual pdf 7 page image

12 13FREEPHONE: 0800 51 41 31Troubleshooting GuidePROBLEMS POSSIBLE REASONS & SOLUTIONSMotor doesn’t start orattachment doesn’t rotate.• For the cups, make sure that the tabs are seated in the slots andturned clockwise.Food is unevenly chopped. • Either you are chopping too much food at once, or you are not pulsingproperly. Reduce the amount of food in the cup.Food is too finely chopped ortoo watery.• The food has been over processed. Use short pulses for best results.Press down on the cup in short intervals.You cannot achieve snowfrom ice cubes.• For best results use ice straight from the freezer. Try using short pulsesinstead of one long one.• Make sure the cup is completely dry before adding ice.Cup is leaking.• Make sure that your lid or blade assembly is properly assembled to thecup. Leaking may occur if it is misaligned when twisted onto the cup.Turn the lid tightly clockwise.Unit doesn’t turn on.• Make sure the unit is plugged in.• Rotate and press down on the cup to turn the unit on.• Make sure the blade assembly is properly assembled to the cup and thatit is not misaligned.Unit doesn’t turn off. • Unplug the power cord from the electrical outlet and call customerservice for support.Doesn’t mix well.• Pulse ingredients for best results. Press down on the cup in shortintervals for even blending and chopping. For frozen ingredients, pulse inshort intervals of 2-5 seconds and repeat.Lid/blade assembly will notproperly align to the cup.• Set the cup on a level surface. Place the lid or blade assembly on top ofthe cup and align the threads so that the lid/blades sit flat on the cup.Twist clockwise so that the lid/blades evenly align to the cup until youhave a tight seal.Notes

/ 9

Related manuals for Ninja BL450QUK series