Ninja BL642ME Owner's Manual

Contents

Ninja BL642ME Owner's Manual Manual pdf 11 page image

10www.ninjakitchenme.comAssembly and Use for the Nutri Ninja™ CupsFig. 2or orIMPORTANT: When processing soft dry ingredientssuch as day-old bread or cheese use quick, short 1second pulses. Do not overfill to avoid overheating theappliance. Allow the appliance to cool after each use.NOTE: Nutri Ninja | Ninja™ Blender Duo with Auto-iQ™Technology can sense which jar is on the motor base. Theavailable function lights will illuminate depending on which jaris placed on the motor base. (Fig. 1)1 Review warning and caution statements abovebefore proceeding to number 2.2 Place the motor base on a clean, dry, level surface such as acounter or table top. Press down on the motor base to makesure that the suction cups adhere to the counter or table top.3 Add ingredients to the Nutri Ninja cup.4 Place the Pro Extractor Blades Assembly onto the cup andtightly screw it on clockwise until you have a good seal.(Fig. 2)5 Turn the Nutri Ninja cup upside down and place it onto themotor base, aligning the tabs on the cup with the motor base.Rotate the Nutri Ninja cup clockwise until it locks in place, youwill hear a click when the lock is engaged. (Fig. 3)6 Press the power button on, and select the speed or Auto-iQprogram that suits your needs. (Fig. 4) The Auto-iQ programwill stop the appliance automatically at the end of theprogram.7 To pause the appliance, press the selected speed or Auto-iQprogram a second time. When the program is paused, thelight on the program button will flash until you press it againto resume the rest of the program.8 Once you have reached your desired consistency, stop theappliance by pressing the power button and wait for the ProExtractor Blades Assembly to stop turning. Turn the NutriNinja™ cup anticlockwise and pull straight up to remove.(Fig. 5, Fig. 6)NOTE: Do not overfill! To avoid spilling, do not add ingredientspast the “MAX” fill line.9 Turn the cup upright and remove the Pro Extractor BladesAssembly by twisting the Pro Extractor Blades Assemblyanticlockwise.10 Place the Sip & Seal ™ lid onto the Nutri Ninja™ cup, twist toseal and enjoy!11 Make sure that the motor base is unplugged when not in use.12 To release the motor base from the counter or table top, placeyour hands underneath both sides of the motor base andgently pull the unit up and towards you.ASSEMBLY USE REMOVALFig. 3 Fig. 4 Fig. 5AUTOFig. 6Fig. 1WARNING: Handle the Pro Extractor Blades™ Assembly with care, as the blades are sharp.WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to bedamaged or to shatter, which may cause personal injury.WARNING: Never leave the appliance unattended while in use.CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of theuser being burned.CAUTION: Remove the Pro Extractor Blades™ Assembly from the cup upon completion of blending. Someingredients have the potential to expand after blending resulting in excessive pressure buildup that canpose a risk of injury.