Ninja BL682NZ Owner's Manual

Also see for BL682NZ: Owner's guide

Contents

Ninja BL682NZ Owner's Manual Manual pdf 7 page image

11 12CUSTOMER CARE - AU: 1800 890 840CUSTOMERCARE-NZ:0800 002 999Assembly and Use for the Processor Bowl - cont.REMOVALFig. 2 Fig. 3 Fig. 4USEFig. 5USEFig. 1USING THE CHOPPING BLADE ASSEMBLY1 Holding the Chopping Blade assembly by the shaft,place it onto the gear shaft inside the bowl. Ensure thatthe attachment fits around the gear shaft and that it isstanding straight.2 Add the ingredients and secure the bowl lid onto thebowl. (Fig. 1)3 Plug the power cord into the electrical outlet and presson the power button ( ). Select the speed or Auto-iQ™program that best suits your needs. Pulse ingredientsfor even chopping by holding the Auto-iQ™ Pulsebutton until your desired consistency is reached.NOTE: Max PULSE iteration is 30 Pulses. After 30Pulses allow 10 minutes to pass before running thePULSE function up to an additional 30 Pulses.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.4 When you have reached your desired consistency, stopthe appliance by pressing the power button ( ) andwait for the blade to stop turning. (Fig. 2)5 To remove the lid, press the release button on the lidand pull the lid handle up to a 90° angle. (Fig. 2)6 Turn the bowl anticlockwise and lift it to remove it fromthe motor base. (Fig. 3)CAUTION: If pouring from the bowl, ALWAYSremove the blade assembly first before pouring.7 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you. (Fig. 4)USING THE DOUGH BLADE1 Holding the dough blade by the shaft, place it onto thegear shaft inside the bowl. Ensure that the attachmentfits around the gear shaft and that it is standing straight.(Fig. 5)2 Add the ingredients and secure the bowl lid onto the bowl.3 Plug the power cord into the electrical outlet and presson the power button ( ). Select LOW/DOUGH on thecontrol panel and process until ingredients cometogether to form a mass.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.4 Once finished making dough, stop the appliance bypressing the power button ( ) and wait for the blade tostop turning.5 To remove the lid, press the release button on the lidand pull the lid handle up to a 90° angle. (Fig. 2)6 Turn the bowl anticlockwise and lift it to remove it fromthe motor base. (Fig. 3)7 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you.(Fig. 4)WARNING: Never leave the appliance unattended while in use.CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.6. To pause the appliance, press the selected speed orAuto-iQ™ Program a second time.7 Once you have reached your desired consistency,turn the power button off. Turn the Nutri Ninja™ cupanticlockwise and pull straight up to remove.(Fig. 5, Fig. 6)NOTE: Do not overfill! To avoid spilling, do not addingredients past the “MAX” fill line.8 Turn the cup upright and remove the Pro ExtractorBlades™ by twisting the blade assembly anticlockwise.9 Place the Sip & Seal™ lid onto the Nutri Ninja™ cup, twistto seal and enjoy!10 Make sure that the motor base is unplugged when not inuse.11 To release the motor basefrom the counter or table top,place your hands underneathboth sides of the motor baseand gently pull the unit up andtowards you. (Fig. 7)Assembly and Use for the Nutri Ninja™Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6Fig. 7Fig. 1NOTE: Nutri Ninja™ | Ninja® Blender System with Auto-iQ™Technology can sense which jar is on the motor base. Thefunction lights will illuminate depending on which jar is placedon the motor base. (Fig. 1)1 Place the motor base on a clean, dry, level surface suchas a counter or table top. Press down on the motor baseto make sure that the suction cups adhere to the counteror table top.2 Add ingredients to the Nutri Ninja™ cup.3 Place the Pro Extractor Blades™ onto the cup and tightlyscrew it on clockwise until you have a good seal. (Fig. 2)4 Turn the Nutri Ninja™ cup upside down and place it ontothe motor base, aligning the tabs on the cup with themotor base. Rotate the Nutri Ninja™ cup clockwise untilit locks in place, you will hear a click when the lock isengaged. (Fig. 3)5 Press the power button on, and select the speed or Auto-iQ™ program that suits your needs. TheAuto-iQ™ program will stop the appliance automaticallyat the end of the program. (Fig. 4)ASSEMBLY USE REMOVALWARNING: Never leave the appliance unattended while in use.CAUTION: Use caution when handling the blade assemblies as the blades are very sharp.IMPORTANT: Make sure that the motor base is plugged in for use.