Ninja BL682SO Owner's Manual

Contents

11 12www.ninjablenders.co.za086 728 8149 ( C a l l s c h a r g e d a t V A S r a t e s . F r e e m i n u t e s d o n o t a p p l y . )Assembly and Use for the Processor Bowl - cont.REMOVALFig. 2 Fig. 3 Fig. 4USEFig. 5USEFig. 1USING THE CHOPPING BLADE1 Holding the Chopping Blade by the shaft, place itonto the gear shaft inside the bowl. Ensure that theattachment fits around the gear shaft and that it isstanding straight.2 Add the ingredients and secure the bowl lid onto thebowl. (Fig. 1)3 Plug the power cord into the electrical outlet and presson the power button ( ). Select the speed or Auto-iQ™program that best suits your needs. Pulse ingredientsfor even chopping by holding the Auto-iQ Pulse buttonuntil your desired consistency is reached.NOTE: Max PULSE iteration is 30 Pulses. After 30Pulses allow 10 minutes to pass before running thePULSE function up to an additional 30 Pulses.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.4 When you have reached your desired consistency, stopthe appliance by pressing the power button ( ) andwait for the blade to stop turning. (Fig. 2)5 To remove the lid, press the release button on the lidand pull the lid handle up to a 90° angle. (Fig. 2)6 Turn the bowl anticlockwise and lift it to remove it fromthe motor base. (Fig. 3)CAUTION: If pouring from the bowl, ALWAYSremove the blade assembly first before pouring.7 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you. (Fig. 4)USING THE DOUGH BLADE1 Holding the dough blade by the shaft, place it onto thegear shaft inside the bowl. Ensure that the attachmentfits around the gear shaft and that it is standing straight.(Fig. 5)2 Add the ingredients and secure the bowl lid onto the bowl.3 Plug the power cord into the electrical outlet and presson the power button ( ). Select LOW/DOUGH on thecontrol panel and process until ingredients cometogether to form a mass.NOTE: Please refer to “Speed Settings & Uses” chartfor suggested uses and speeds.4 Once finished making dough, stop the appliance bypressing the power button ( ) and wait for the blade tostop turning.5 To remove the lid, press the release button on the lidand pull the lid handle up to a 90° angle. (Fig. 2)6 Turn the bowl anticlockwise and lift it to remove it fromthe motor base. (Fig. 3)7 To release the motor base from the counter or table top,place your hands underneath both sides of the motorbase and gently pull the unit up and towards you.(Fig. 4)WARNING: Never leave the appliance unattended while in use.CAUTION: Chopping Blade is sharp, not locked in place and removable, handle with care. When handlingthe Chopping Blade, always hold by the shaft.7 Once you have reached your desired consistency, turn thepower button off. Turn the Nutri Ninja cup anticlockwiseand pull straight up to remove. (Fig. 5, Fig. 6)NOTE: Do not overfill! To avoid spilling, do not addingredients past the “MAX” fill line.8 Turn the cup upright and remove the Pro ExtractorBlades by twisting the blade assembly anticlockwise.9 Place the Sip & Seal™ lid onto the Nutri Ninja cup, twistto seal and enjoy!10 Make sure that the motor base is unplugged when notin use.11 To release the motor base from the counter or table top,place your hands underneathboth sides of the motor baseand gently pull the unit up andtowards you. (Fig. 7)Assembly and Use for the Nutri Ninja™Fig. 3 Fig. 4 Fig. 5 Fig. 6Fig. 1NOTE: Nutri Ninja | Ninja™ Blender System with Auto-iQ™ Technology can sense which jar is on the motorbase. The function lights will illuminate depending onwhich jar is placed on the motor base. (Fig. 1)1 Place the motor base on a clean, dry, level surface such as acounter or table top. Press down on the motor base to makesure that the suction cups adhere to the counter or table top.2 Add ingredients to the Nutri Ninja cup.3 Place the Pro Extractor Blades onto the cup and tightlyscrew it on clockwise until you have a good seal. (Fig. 2)4 Turn the Nutri Ninja cup upside down and place it onto themotor base, aligning the tabs on the cup with the motorbase. Rotate the Nutri Ninja cup clockwise until it locks inplace, you will hear a click when the lock is engaged. (Fig. 3)5 Press the power button on, and select the speed orAuto-iQ program that suits your needs. TheAuto-iQ program will stop the appliance automaticallyat the end of the program. (Fig. 4)6. To pause the appliance, press the selected speed orAuto-iQ Program a second time. Fig. 7ASSEMBLY USE REMOVALFig. 2or orWARNING: Never leave the appliance unattended while in use.CAUTION: Pro Extractor Blades™ are sharp and removable, handle with care. When handling the ProExtractor Blades, do not hold the blades, always hold by the base of the Pro Extractor Blades.CAUTION: DO NOT BLEND HOT LIQUIDS. Allow the liquids and foods to cool to room temperature before blending.IMPORTANT: Make sure that the motor base is plugged in for use.IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1second pulses. Do not overfill to avoid overheating the appliance. Allow the appliance to cool after each use.