Ninja BL771 Owner's Manual
Also see for BL771 series: Owner's guideOwner's guide
7 8www.ninjakitchen.com1-877-646- 5288Before First UsePLEASE KEEP THESE IMPORTANTSAFEGUARDS IN MIND WHEN USING THEAPPLIANCE:IMPORTANT: Make sure that the motor baseis plugged in for use.IMPORTANT: Never add ingredients into thecontainer before placing the Blade Assemblyin first.IMPORTANT: Blade Assemblies are notinterchangeable.IMPORTANT: DO NOT attempt to operate theappliance without the lid on.IMPORTANT: Never run the appliance empty.IMPORTANT: Appliance accessories are notintended to be used in the microwave as itmay result in damage to the accessories.CAUTION: Do not immerse the motor base intowater or any other liquid.1 Remove all packaging material and labels from theappliance. Separate/remove all parts from each other.2 Wash the lids, pitcher, bowls, Nutri Ninja® cups andblade assemblies in warm, soapy water. When washingthe blade assemblies, use a dish-washing utensil with ahandle to avoid direct hand contact with blades.WARNING: Handle the Blade Assemblies withcare when washing, as the blades are sharp.3 Handle blade assemblies with care to avoid contactwith sharp edges. Rinse and air dry thoroughly.4 The pitcher, bowls, Nutri Ninja cups, lids andBlade Assemblies are all dishwasher safe. It isrecommended that the lids and Blade Assembliesbe placed on the top rack. Ensure that the BladeAssemblies are removed from the containers beforeplacing in the dishwasher.5 Wipe the motor base clean with a damp cloth.WARNING: Stacked BladeAssembly is sharp and notlocked in place. If using thepour spout, ensure the lid isfully locked onto the blenderpitcher. Failure to do so willresult in a risk of laceration.WARNING: StackedBlade Assembly is sharpand not locked in place.If pouring with the lidremoved, carefully removethe Stacked Blade Assemblyfirst, holding it by the shaft.Failure to do so will result ina risk of laceration.Assembly and Use for the Blender PitcherWARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged orto shatter, which may cause personal injury.WARNING: Never leave the appliance unattended while in use.CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of theuser being burned.IMPORTANT: Make sure that the motor base is plugged in for use.Fig. 3bFig. 1 Fig. 4 Fig. 5ASSEMBLYFig. 3aFig. 2OR1 Review warning and caution statements above beforeproceeding to number 2.2 Place the motor base on a clean, dry, level surfacesuch as a counter or table top.3 Align and lower the Pitcher onto the motor base.(Fig. 1) Handle should be aligned slightly to the right ofthe “LOCK” symbol on the motor base.4 Rotate the blender pitcher clockwise until it clicks inplace. As the pitcher rotates, it will lower and the safetytabs on the bottom of the pitcher will slide under thesafety tabs on the top of the motor base. (Fig. 2)5 The pitcher can be placed on the motor base two ways;the handle can be on the front right corner or the frontleft corner. (Fig. 3a, Fig. 3b)6 Holding the Stacked Blade Assembly by the top of theshaft, place it onto the drive gear inside the pitcher.Ensure that the Stacked Blade Assembly is seatedproperly and is standing upright. (Fig. 4)NOTE: The Stacked Blade Assembly will fit loosely onthe drive gear.7 Add the ingredients to the pitcher, making sure thatthey do not exceed the highest measured marking lineon the side of the pitcher.NOTE: If you need to add additional ingredients whilethe appliance is processing, open the pour spout capand pour the ingredients in through the opening.NOTE: When blending any kind of liquids, such asmixtures of any drinks or smoothies, do not exceed the“Max liquid” mark (64 ounces) on the pitcher.8 Plug the power cord into the electrical outlet and pressthe power button ( ).IMPORTANT: As a safety feature, the powerbutton ( ) will flash and the motor will not workif the pitcher and lid are not installed correctly.When the pitcher and lid are installed properly,the power button ( ) will be solid, indicating thatthe appliance is ready for use.9 Holding the lid by the handle in the upright position,place it on top of the pitcher aligning the arrow ( )located on the lid with the arrow ( ) located on thepitcher’s handle. (Fig. 5) Press the handle down untilyou hear a click.WARNING: ChoppingBlade Assembly is sharp andnot locked in place. Beforeemptying contents carefullyremove lid and ChoppingBlade Assembly, holding it bythe shaft. Failure to do so will result in arisk of laceration. |
Related manuals for Ninja BL771 series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine