Ninja BL771 series Owner's Manual

Also see for BL771 series: Owner's guide Owner's guide

Contents

Ninja BL771 series Owner's Manual Manual pdf 12 page image

11TOLL FREE: 1- 877- 646- 5288Assembly and Use for the BowlASSEMBLYWARNING: Never leave the appliance unattended while in use.Fig. 1Fig. 2ASSEMBLYFig. 3aFig. 3bIMPORTANT: Make sure that the motor base isplugged in for use.1 Place the motor base on a clean, dry, level surfacesuch as a counter or table top.2 Align and lower the Bowl onto the motor base.(Fig. 1) Handle should be aligned slightly to theright of the “LOCK” symbol on the motor base.3 Rotate the bowl clockwise as far as it will go tolock in place. (Fig. 2)4 The bowl can be placed on the motor base twoways; the handle can be on the front right corner orthe front left corner. (Fig. 3a, Fig. 3b)5 Holding the desired blade by the top of the shaft,place it onto the drive gear inside the bowl. Ensurethat the attachment is seated properly and isstanding upright. (Fig. 4)NOTE: The blade will fit loosely on the drive gear.6 Add the ingredients to the bowl, making sure thatthey do not exceed the highest measured markingline on the side of the bowl.7 Plug the power cord into the electrical outlet andpress the power button ( ).NOTE: As a safety feature, the power button( ) will flash and the motor will not work ifthe bowl and lid are not installed correctly.When the bowl and lid are installed properly,the power button ( ) will be solid, indicatingthat the appliance is ready for use.8 Holding the lid by the handle in the uprightposition, place it on top of the bowl aligning thearrow ( ) located on the lid with the arrow( ) located on the bowl’s handle. (Fig. 5) Press thehandle down until you hear a click.NOTE: The 64 oz. bowl is not intended forblending drinks. Do not overfill.NOTE: To add liquids duringprocessing, open the drizzlehole on the top of the lid andpour the liquid slowly into themixture.Fig. 4Fig. 5BL771_30_BL771C_30_IB_ENG_121206_6.indd 11 12-12-06 11:23 AM