Ninja BL773CO Mega Kitchen System Owner's Manual

Also see for BL773CO Mega Kitchen System: Owner's guide

Contents

Ninja BL773CO Mega Kitchen System Owner's Manual Manual pdf 11 page image

10www.ninjakitchen.comUSING THE DISCSIMPORTANT: Only use Speed 1 when using eitherdisc attachment.NOTE: The Slicing/Shredding Disc is reversible. Use theside labeled “Slicer” for Slicing. Carefully flip the disc overto the side labeled “Shredder” for shredding.1 Place the motor base on a clean, dry, level surface suchas a counter or table top. (Fig. 5)2 Secure the bowl onto the motor base.3 Place the spindle inside the bowl.4 Use the finger holes to grasp the selected disc and place itover the spindle.5 Place the feed chute lid on the bowl and turn clockwiseuntil you here a click indicating the lid is locked in place.(Fig. 5)6 Plug the power cord into the electrical outlet and press thepower button ( ) to turn the unit “On”.7 Select Speed 1 on the control panel. The discs willbegin spinning.8 Add the food that you want to slice, shred or grate throughthe feed chute on the lid. (Fig. 5) Use the two-part foodpusher to help guide the food through the feed chute. Themiddle piece of the food pusher is removable to use forsmaller ingredients.9 When finished, stop the appliance by pressing the powerbutton ( ) and wait for the disc to stop turning. Press thebutton on the feed chute lid located near the handle tounlock and turn the lid counterclockwise. Lift to removefrom the processor bowl. Using the finger holes, carefullylift the disc out of the bowl and remove the spindle.Fig. 5Use caution when handling the discs as the blades are very sharp.Assembly and Use for the Disc AttachmentsNOTE: The feed chute lid features a two part pusher to guide food throughthe chute. Use the full pusher for larger items such as cucumbers.Twist and pull to remove the smaller pusher and use the narrow chutefor smaller items such as carrots.