Ninja CT610 Series Instruction Manual

Also see for CT610 Series: Quick assembly

Contents

Ninja CT610 Series Instruction Manual Manual pdf 16 page image

151-877-646-5288CARE &MAINTENANCECLEANING1 Separate all parts.2 Hand-WashingWash the pitcher, lid, and Stacked BladeAssembly in warm, soapy water using adishwashing utensil with a handle to avoiddirect contact with the blades. Exercise carewhen handling Stacked Blade Assembly asthe blades are sharp. Thoroughly rinse andair-dry all parts.DishwasherThe pitcher, lid, and Stacked BladeAssembly are dishwasher safe. It isrecommended that the lid and StackedBlade Assembly be placed on the top rackof the dishwasher. Ensure the StackedBlade Assembly is removed from thepitcher before placing in the dishwasher.Exercise care when handling Stacked BladeAssembly.Motor BaseTurn off the unit and unplug the motor basebefore cleaning. Wipe motor base with aclean, damp cloth.Clean the touchscreen with a soft cloth,such as microfiber, to prevent scratching. Toremove residue from the touchscreen, youmay use an all-purpose cleaner.Never spray the base or touchscreen withwater or other liquids.DO NOT use abrasive cloths/pads/brushesto clean the base or touchscreen, as thiscan dull or scratch the surface.STORINGStore your unit upright with the Stacked BladeAssembly inside the pitcher and the lid securedon top.DO NOT stack items on top of the unit. Storeany remaining attachments alongside the unitor in a cabinet where they will not be damagedor create a hazard.RESETTING THE MOTOR THERMOSTATThis unit features a unique safety systemthat prevents damage to the motor and drivesystem should you inadvertently overloadit. If the unit is overloaded, the motor will betemporarily disabled. Should this occur, followthe reset procedure below.1 Unplug the unit from the electrical outlet.2 Allow the unit to cool for approximately 15minutes.3 Remove the lid and Stacked BladeAssembly from the pitcher. Empty thepitcher and ensure no ingredients arejamming the Stacked Blade Assembly.4 Re-install the pitcher onto the base and plugthe unit into the electrical outlet.5 Once the unit has been reset, you mayresume using it, making sure to not exceedthe maximum capacities.IMPORTANT: Ensure that maximumcapacities are not exceeded. This is themost typical cause of appliance overload.If your unit needs servicing, please callCustomer Service at 1-877-646-5288.ORDERING REPLACEMENT PARTSTo order additional parts and attachments,please visit ninjakitchen.com or contactCustomer Service at 1-877-646-5288.